Flooring cost guide
Epoxy flooring cost
in Charlotte, NC.
Plan for $5.50–$9 per square foot for a standard flake garage floor, or $10–$13+ for a metallic finish. See the scope behind the range, then request a written quote for your floor.
Request an estimateHow much does epoxy flooring cost in Charlotte?
CLT Epoxy’s budget range for a standard flake garage floor is $5.50–$9 per square foot installed. A metallic floor is $10–$13+ per square foot installed. These planning ranges assume an accessible, empty space with sound concrete; the measured area, preparation and selected system determine your written quote. Taxes and additional work described below are separate.
Garage floor coating prices in Charlotte
For a home garage, the quote needs to account for more than the floor area. Bare concrete, peeling paint and an existing coating can require different preparation. Repairs, steps, raised edges and the selected finish also affect the total. Include those details when asking about garage floor epoxy pricing.
For a two-car or three-car garage, measure each section rather than relying on the number of parking spaces. The area calculator below helps you prepare approximate dimensions. Use the garage floor coating guide to decide which finish and installation questions to include with your estimate request.
Garage sizes and example budgets
These are calculated examples using the standard flake range, before taxes or additional work. They illustrate possible budgets rather than completed-job invoices. Measure your floor instead of estimating its area from the number of cars it holds.
| Measured floor area | Standard flake budget |
|---|---|
| 400 sq ft | $2,200–$3,600 |
| 500 sq ft | $2,750–$4,500 |
| 750 sq ft | $4,125–$6,750 |
For comparison, a 500-square-foot metallic floor has a planning range of $5,000–$6,500 or more. Custom effects and additional preparation can take it above that range. Small rooms and single-car garages need an individual quote because setup and equipment costs do not fall in proportion to floor area.
What the standard flake budget covers
The standard scope covers mechanical preparation of suitable bare concrete, a base coat, decorative flake, a protective topcoat, installation labor and job cleanup for the measured horizontal floor. Your written proposal identifies the products, layers, finish and covered area before work begins.
Old coating or adhesive removal, crack and joint work, moisture mitigation, major surface repair, steps, stem walls, aprons, equipment moving and additional topcoats are priced separately when needed. The quote should list each allowance or exclusion, any access or travel charge, applicable tax and the total. Additional work must be agreed before it is performed.
Commercial and industrial flooring prices
Commercial and industrial floors receive a project-specific quote. A retail space, a restaurant work area and a warehouse aisle can need different surface preparation, texture, coating thickness and return-to-service schedules. Applying a residential garage rate to all three would hide those differences.
Send the area, existing surface, daily traffic, cleaning methods, spills or chemical exposure, operating hours and available downtime. Include any coving, drainage, line marking or phased-work requirements so those items appear in the scope. Start with our commercial flooring guide or industrial flooring guide.
The main cost drivers
| Factor | Why it changes the scope |
|---|---|
| Floor area | Sets the approximate material quantity and preparation area. |
| Existing surface | Old coating, glue, contamination or repairs can require additional work. |
| Moisture and slab condition | Testing and any required mitigation affect the proposed system. |
| Coating system | Products, build, texture, layers and finish details are part of the specification. |
| Access and schedule | Occupied spaces, phased work and restricted access can change labor and timing. |
| Edges and transitions | Steps, vertical surfaces and other details need to be identified. |
Estimate the area of a rectangular space
Multiply this area by $5.50 and $9 for a standard flake planning range. Taxes, additional work and small-project pricing are separate; final measurements and scope belong in your written quote.
What a useful written estimate should explain
- Included preparation, repairs and any exclusions.
- The proposed coating layers and products.
- Areas included: floor, steps, edges or vertical surfaces.
- Installation schedule and return-to-use instructions.
- Total price, payment terms and warranty terms, if offered.
Compare like-for-like proposals.
Two quotes for the same garage can describe different work. Ask both contractors to identify preparation, repairs, material layers and exclusions before comparing the total. A lower number alone does not tell you whether the scope is equivalent.
For a business or facility, include operating hours, equipment, exposure and available downtime as well as floor area. Our commercial flooring and industrial flooring pages explain the information needed for those estimates.
Cost questions
Can you give a firm price from photos?
Photos can help with an initial discussion. Final scope may require verified measurements and a review of the slab, access and operating conditions.
Does an old coating affect cost?
It can. Removal and preparation requirements depend on the old coating’s condition and compatibility with the proposed system.
Can I get a price for a two-car garage?
For a measured 400–500-square-foot floor, the standard flake planning range is $2,200–$4,500 before tax and additional work. Send dimensions and photos so we can review the scope. “Two-car garage” alone does not establish its area.
Start with your space.
Tell us the floor’s size, condition and how you use the space. We’ll start the conversation from there.
Request an estimate